Migna Safety Solutions

General Industry · Self-Paced · about 30 min total

Bloodborne Pathogens Annual Refresher

Introductory · Course MIG-GI-110

The annual bloodborne pathogens refresher required by 29 CFR 1910.1030(g)(2)(ii), for workers who have already completed full training.

Ver este curso en español

This is a Migna Safety Solutions course with a Migna certificate of completion. It is not OSHA Outreach Training and does not include a Department of Labor card.

OSHA requires bloodborne pathogens training at initial assignment and at least annually thereafter. This condensed refresher is for workers who have already completed the full course and need the yearly review — it revisits exposure routes, the exposure control plan, universal and standard precautions, engineering and work-practice controls, PPE, the HBV vaccine, what to do after an exposure incident, and labeling. Upon passing you receive a Migna certificate of completion; annual retraining is required by the standard.

What you are buying

15 min
Enforced seat time
2
Modules
9
Lessons
3
Interactive exercises
30
Quiz questions

Seat time is enforced on our servers. The clock is calculated from signed progress events rather than in your browser, so it cannot be sped up — a certificate that states 15 minutes of training means it. The 30 minutes shown above is that gate plus the quizzes and final exam, which are not on the clock.

Retraining due every 12 months

This interval comes from the standard the course is written against, not from us. The date is printed on the certificate, and we email a reminder before it lapses.

Written against 3 published standards

Every citation below appears in the course content and is checked against the current text of the rule before publication.

  • 1910.1030(f)
  • 1910.1030(g)(2)(vii)
  • 29 CFR 1910.1030

What You Will Be Able To Do

The course is built to reach these, and the quizzes are written to confirm them.

  • Restate the bloodborne pathogens of concern, their routes of transmission and the precautions that apply
  • Apply the engineering and work practice controls, including sharps handling and PPE selection
  • State the steps to take after an exposure incident and the follow-up the employer must provide
  • Describe the labeling, signage and exposure control plan requirements

What's Covered

  1. Module 1: Annual Review: Pathogens, Routes & Controls

    • The Three Pathogens and the Routes That Matter
    • Controls, PPE, and What May Have Slipped This Year

  2. Module 2: Exposure Incidents, the Plan & Labeling

    • The Response You Rehearse Annually