Migna Safety Solutions

General Industry · Self-Paced · about 45 min total

Laboratory Safety & the Chemical Hygiene Plan

Intermediate · Course MIG-GI-214

The Laboratory Standard — what makes a workplace a laboratory, the Chemical Hygiene Plan and its annual review, particularly hazardous substances and designated areas, exposure determination, and why the lab standard displaces most of Subpart Z but never the PELs.

Ver este curso en español

This is a Migna Safety Solutions course with a Migna certificate of completion. It is not OSHA Outreach Training and does not include a Department of Labor card.

29 CFR 1910.1450 is unusual among OSHA standards: rather than prescribing controls for one substance, it hands the employer a framework and requires them to write their own. Where it applies, it displaces the substance-specific requirements of Subpart Z — but not the permissible exposure limits, which continue to apply in full. Laboratories that believe the standard exempts them from PELs have misread it in the most consequential possible direction. This course covers what counts as laboratory use of hazardous chemicals and the four conditions that must all hold; how the standard interacts with Subpart Z and with hazard communication; the Chemical Hygiene Plan, its eight required elements and the annual review; the Chemical Hygiene Officer; exposure determination and the 15-working-day notification; particularly hazardous substances, designated areas and the additional provisions they trigger; medical consultation and examination and what actually entitles an employee to one; hazard identification, labels and safety data sheets; and the information and training requirements. It is written for laboratory workers, technicians, principal investigators, laboratory managers and the Chemical Hygiene Officers who have to make the plan real. Issues a Migna certificate of completion.

What you are buying

24 min
Enforced seat time
2
Modules
6
Lessons
2
Interactive exercises
24
Quiz questions

Seat time is enforced on our servers. The clock is calculated from signed progress events rather than in your browser, so it cannot be sped up — a certificate that states 24 minutes of training means it. The 45 minutes shown above is that gate plus the quizzes and final exam, which are not on the clock.

This certificate does not expire on a clock

The standard behind this course sets no fixed retraining interval, so we do not print one. Retraining is triggered by events instead — a new hazard, a changed process, or an observed deficiency. Your employer or insurer may set their own interval, which is a real obligation but not a federal one.

Written against 13 published standards

Every citation below appears in the course content and is checked against the current text of the rule before publication.

  • 1910.1020
  • 1910.1200
  • 1910.134
  • 1910.1450
  • 1910.1450(d)
  • 1910.1450(e)
  • 1910.1450(e)(3)(viii)
  • 1910.1450(f)
  • 1910.1450(g)
  • 1910.1450(h)
  • 1910.1450(j)
  • 29 CFR 1910.1450
  • Subpart Z

What's Covered

  1. Module 1: Scope, and the Chemical Hygiene Plan

    • What Counts as a Laboratory, and What the Plan Must Contain
  2. Module 2: Particularly Hazardous Substances, Medical Provisions, and Training

    • Designated Areas, Medical Consultation, and What Employees Must Be Told